About the 620L 0055 400 0010 US ENW 0000 000 B0 000 000
The Eurotherm 620L 0055 400 0010 UK ENW 0000 000 B0 000 000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
If you you plan to install the Eurotherm 620L 0055 400 0010 UK ENW 0000 000 B0 000 000 in a location in the United States, consider that many local building codes, electrical codes, and other codes and requirements specify that the installation must be UL certified. To meet this requirement you must make sure the installation meets some requirements.
You must install motor overload protection. This a device installed on the motor winding and it is the responsibility of the installer or inspector to make sure it is in compliance with all local and national codes.
The installation also must have over temperature sensing devices. This is to prevent a fire hazard if the motor becomes too hot.
Standards also exist for cable temperature ratings. The cables must be copper and meet specific temperature thresholds for safety. Also, the fuses used to protect the branch circuits must meet National codes standards.
The Eurotherm 620L 0055 400 0010 UK ENW 0000 000 B0 000 000 must also meet or exceed certain operating temperature standards. The terminals on the device that make the power and control connections must meet standards. This also applies to the torque requirements for tightening the connections.
